This lucite bath caddy follows the same simple process as the lucite square tray on the blog with one extra step! Follow along for the instructions.

Here’s what you need:

• 2 Gold Handle Pulls (5 inches)
• 2 Square Plastic Sheets 12 X 36 (1/8 inches thick)
• Guerilla Glue Clear Epoxy
• Plastic Poster frame pieces (not pictured above)

Measure, mark and drill holes into the plastic sheets. Attach the handles to the sheets. You may have to adjust the screw length depending on the thickness of the sheet. My handles came with break-away screws.

Some DIY projects added window moulding to line the outside of the tray. I ordered the WRONG moulding so instead I had to improvise. I took apart an old cheap Walmart plastic poster frame that I had lying around.

I sprayed the frame pieces, cut to size and then used gorilla glue to adhere the plastic frame to the tray.

My friend came to visit and I set mine up in my spare bathroom with sample toiletries for her.