The Nitty Gritty for the Industrial Rack

Supplies of the Industrial Rack project:

  • 2 Steel conduit pipe (60 X 3/4 inch)
    • Threaded on both ends
  • 1 Steel conduit pipe (36 X 3/4 inch)
    • Again threaded on both ends
  • 6 floor flanges (3/4 inch)
  • 2 elbow joints (3/4 inch)
  • 4 nipples (3/4 inch & threaded on both sides)
  • 4 caps (3/4 inch)
  • Flat black protective spray paint
  • 24 wood screws
  • wood base (I found a wood base at lower that was a bit longer than my horizontal pole- that gave me a wood lip and a stronger base).

Once you have all the pieces, assembly is super easy. Spray paint first. Once all your pipes and joints have dried go for the base. Screw/drill the four flanges to the bottom of the wood base (a drill is not necessary but makes the project fly by). After you assemble the base, drill/screw the two left over flanges to the top of the base and insert pipes. Voila!

IndustrialRack

Total price: $120 (Got all supplies from Lowe’s)

*A vendor in KC sells a similar rack for $218-not counting shipping.

Industrial Rack

My boyfriend has a TINY closet. After doing some research, I decided the best solution for looks and storage would be an industrial rack. But buying one is expensive so I decided I would try to make it instead. Below is the finished project.

IndustrialRack

Honestly, the DIY industrial rack was super simple. I did it over the weekend and finished in time to catch-up on homework, TV shows and family.

Stay tuned this week and I will update the blog with step-by-step instructions on how you can copy it.